The DELTA-T range are Type I, self-supporting cable ducts in accordance with the EN-1433 standard. They are reinforced cable ducts made of C60/75 grade, self-compacting concrete (SCC) that do not require additional lateral reinforcement when being installed.
DELTA-T ducts are extremely suitable for the load classes A15, B125, C250 and D400. The ducts are able to transfer such loads to the underlying foundation that naturally must have been correctly designed and built for this.
Within the DELTA-T range different types of covers are possible, namely concrete, plywood or plastic.
Moreover, the range is very broad and there are different, standard inside widths available: 200mm – 300mm – 400mm – 500mm – 600mm. Larger inside widths are also possible on a project-by-project basis, such as for example 800mm – 1000mm – 1200mm - 1500mm - 2000mm even up to 2500mm.
The DELTA-T range is completed with complimentary elements such as sand traps, covers, sludge traps and connectors.
The ducts all have a tongue and groove joint that facilitates placing and aligning them. After placement, this joint will limit settlement in case of incorrectly used, designed and/or laid foundations.
The technical datasheets and installation instructions of our standard models are directly available online by means of downloads or in the product selector below.
Variants and combinations are possible of all our models. However, this will have an impact on the price and term of delivery. Please do not hesitate to contact us for a customised offer for your project.
The DELTA-T range offers you:
